The Sterilight SCM-200 provides point-of-entry disinfection with a flow rate of 10 gpm (37.9 lpm) at a 30 mJ/cm2 dose (8 gpm (30.3 lpm) if a dose of 40 mJ/cm2 is required.) This modular system incorporates a UV intensity monitor for conditions where water quality is unknown and/or a monitoring system is required. The system incorporates our new Cobalt™ "PLUS" controller providing constant output current and a universal power input (100-240V./50-60Hz.), as well as visually displaying % UV output, remaining lamp life and total days of operation. Coupled with a true 254nm UV intensity monitor, these systems are able to continuously monitor the system and warn you of any changes in water quality or if the water becomes unsafe to drink. The system also comes with a powered solenoid output that allows you to hook a normally closed solenoid valve (sold separately) directly into the controller. Additionally, an optional Y-cable is available that provides a 4-20mA output for a physical connection to a remote monitoring system. Systems are packaged in a water-tight case and come fully CSA and CE compliant.
The SCM-200 is manufactured with a polished, 304 stainless steel, axial flow reactor and comes with unique combination ports with a 1" MNPT thread on the outside and a ¾ " FNPT thread on the inside. Quality is evident throughout the Cobalt platform ranging from domed quartz sleeves with fire-polished ends to seamless connections. Using high-output Sterilume™-HO coated low pressure germicidal UV lamps, these systems provide an economical way of treating water requiring a 99.99% reduction in bacteria and viruses. Lamp change is easily accomplished without interrupting the water flow, or having to drain the reactor and the overmoulded connector can be removed without any additional tools.
The Sterilight SCM-320 provides point-of-entry disinfection with a flow rate of 18 gpm (68.1 lpm) at a 30 mJ/cm2 dose (13 gpm (49.2 lpm) if a dose of 40 mJ/cm2 is required.) This modular system incorporates a UV intensity monitor for conditions where water quality is unknown and/or a monitoring system is required. The system incorporates our new Cobalt™ "PLUS" controller providing constant output current and a universal power input (100-240V./50-60Hz.), as well as visually displaying % UV output, remaining lamp life and total days of operation. Coupled with a true 254nm UV intensity monitor, these systems are able to continuously monitor the system and warn you of any changes in water quality or if the water becomes unsafe to drink. The system also comes with a powered solenoid output that allows you to hook a normally closed solenoid valve (sold separately) directly into the controller. Additionally, an optional Y-cable is available that provides a 4-20mA output for a physical connection to a remote monitoring system. Systems are packaged in a water-tight case and come fully CSA and CE compliant.
The SCM-320 is manufactured with a polished, 304 stainless steel, axial flow reactor and comes with 1" MNPT connections. Quality is evident throughout the Cobalt platform ranging from domed quartz sleeves with fire-polished ends to seamless connections. Using high-output Sterilume™-HO coated low pressure germicidal UV lamps, these systems provide an economical way of treating water requiring a 99.99% reduction in bacteria and viruses. Lamp change is easily accomplished without interrupting the water flow, or having to drain the reactor and the overmoulded connector can be removed without any additional tools.
The Sterilight SCM-600 provides point-of-entry disinfection with a flow rate of 35 gpm (132.5 lpm) at a 30 mJ/cm2 dose (26 gpm (98.4 lpm) if a dose of 40 mJ/cm2 is required.) This modular system incorporates a UV intensity monitor for conditions where water quality is unknown and/or a monitoring system is required. The system incorporates our new Cobalt™ "PLUS" controller providing constant output current and a universal power input (100-240V./50-60Hz.), as well as visually displaying % UV output, remaining lamp life and total days of operation. Coupled with a true 254nm UV intensity monitor, these systems are able to continuously monitor the system and warn you of any changes in water quality or if the water becomes unsafe to drink. The system also comes with a powered solenoid output that allows you to hook a normally closed solenoid valve (sold separately) directly into the controller. Additionally, an optional Y-cable is available that provides a 4-20mA output for a physical connection to a remote monitoring system. Systems are packaged in a water-tight case and come fully CSA and CE compliant.
The SCM-600 is manufactured with a polished, 304 stainless steel, axial flow reactor and comes with 1" MNPT connections. Quality is evident throughout the Cobalt platform ranging from domed quartz sleeves with fire-polished ends to seamless connections. Using high-output Sterilume™-HO coated low pressure germicidal UV lamps, these systems provide an economical way of treating water requiring a 99.99% reduction in bacteria and viruses. Lamp change is easily accomplished without interrupting the water flow, or having to drain the reactor and the overmoulded connector can be removed without any additional tools.
The Sterilight SCM-740 provides point-of-entry disinfection with a flow rate of 42 gpm (158.9 lpm) at a 30 mJ/cm2 dose (31 gpm (117.3 lpm) if a dose of 40 mJ/cm2 is required.) This modular system incorporates a UV intensity monitor for conditions where water quality is unknown and/or a monitoring system is required. The system incorporates our new Cobalt™ "PLUS" controller providing constant output current and a universal power input (100-240V./50-60Hz.), as well as visually displaying % UV output, remaining lamp life and total days of operation. Coupled with a true 254nm UV intensity monitor, these systems are able to continuously monitor the system and warn you of any changes in water quality or if the water becomes unsafe to drink. The system also comes with a powered solenoid output that allows you to hook a normally closed solenoid valve (sold separately) directly into the controller. Additionally, an optional Y-cable is available that provides a 4-20mA output for a physical connection to a remote monitoring system. Systems are packaged in a water-tight case and come fully CSA and CE compliant.
The SCM-740 is manufactured with a polished, 304 stainless steel, axial flow reactor and comes with 1" MNPT connections. Quality is evident throughout the Cobalt platform ranging from domed quartz sleeves with fire-polished ends to seamless connections. Using high-output Sterilume™-HO coated low pressure germicidal UV lamps, these systems provide an economical way of treating water requiring a 99.99% reduction in bacteria and viruses. Lamp change is easily accomplished without interrupting the water flow, or having to drain the reactor and the overmoulded connector can be removed without any additional tools.
Ruy D. de Guzmán 708 - CABA - Argentina | info@ozonoargentina.com.ar | (5411) 4303.4550 / 4301.5666
